Navigation: Home > Product > Pressure > Pressure Transmitter > Melt High Temperature Type > Melt Pressure Transmitter PT-M010
-
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0 -
Melt Pressure Transmitter PT-M0
Melt Pressure Transmitter PT-M010
| See more "Melt High Temperature Type" Products
product category: Melt High Temperature Type
Model: PT-M010
Viewed:
OnLine Service : | |
Print this page | E-mail Us |
Live Messenger | Skype Online |
Product Detail
PT-M010 Series Melt Pressure Transmitter is ideal for space restricted areas applications
required, where mounting space is limited. It also has a free-spinning jam nut that simplifies
installation. The PT124G comes equipped with six or eight pin bendix connector. It can be
interchangeable with the similar world standard products. It is suitable to measure and
control the melt pressure in chemical fiber equipment, rubber and plastic machine and so on.
Pressure range | 0-3.5MPa… 0-150MPa(0-500psi…0-20000psi) |
Over Pressure | 1.5 X FSO |
Combined Error |
±1.0% FSO, ± 1.5% (Including Linearity, Repeatability & Hysteresis) |
Output | 3.33 mV/V, 2mV/V |
Input Voltage | 10VDC |
Repeatability | +/- 0.2%FSO |
Bridge Resistance |
Input: 345 Ohms minimum Output: 350 Ohms +/- 10% |
Internal Shunt Calibration (R-Cal) | 80% FSO +/- 1% |
Insulation Resistance | 200 megohms @ 100 Vdc |
Max Diaphragm Temperature | 350℃ |
Mounting Torque | 500 inch/lbs. maximum |
Standard Wetted Parts | Diaphragm coated 15-5 PH SST |
Process connector | 1/2″-20UNF, M14×1.5, M18×1.5 Optional |
More information
If you have any enquiry about pricing or cooperation, please feel free to email us at sales@bingo-sensor.com or submit the following enquiry form or leave us a message by clicking the chat button suspending on left side of website. Our sales representative will contact you within 24 hours. Thank you for your interest in our products !
Select by Categories
- Differential Pressure Type
- Flush-diaphragm Type
- Industrial Type
- Melt High Temperature Type
- Submersible Type
Viewed Product